We are testing out the network monitoring piece in SCOM 2012 but for some reason it never does show the servers. We have a test switch with a monitored server connected directly to it but after the discovery completes it doesn't show the server as being connected. The switch in question is a Juniper and if you look at the diagram view for the device it does show all of the ports under "not monitored" and the Processor and Memory under "Healthy." The following event sequence shows up in the"Network Discovery Progress Events" view:
Full Discovery Started for 1 request(s)
Proceeding to discover all systems in repository
Probing <<IP Address 1>>
Probing <<IP Address 2>>
Probing completed for <<IP Address 2>>
PostProcessing started
Probing completed for <<IP Address 1>>
PostProcessing completed
Switch::<<IP Address 2>> discovered successfully
Switch::<<IP Address 1>> discovered successfully
Discovery Completed / Devices discovered: 2 / Windows computers filtered: 0 / Devices in pending list: 0 / Devices excluded: 0
No devices were found in filtered list after discovery
Start processing connections to computers
Finished processing connections to computers. Number of connections made: 0
I've been trying to find some documentation on any other settings that are required to get network monitoring to work as advertised but so far I have struck out. Help!