How send the description of the interfaces of the cisco routers in scomm 2012 , because when a interface is down only send for example IF-20 that is the mib of the interface down.

Hi,

We are using the scomm2012 for monitor the alert o cisco routers, when a interface is down the alarm send the mib of the inteface with troubles for example IF-20  , is possible send the description of the intefaces with troubles that we have configured in the interface  , for example: 

interface giga 0/20

description   ´*** LAN SALES DEPARTMENT ****

ip address 10.10.10.1 255.255.255.0

speed 100

duplex full

THANKS FOR YOUR HELP