Quantcast
Channel: Operations Manager - General forum
Viewing all 11941 articles
Browse latest View live

How do I solve a "ManagementPackSecureReference" OLE DB datasource issue in SCOM 2012R2?

$
0
0

I'm new to SCOM...

In the SCOM console under Authoring/OLE DB Datasource I have users who receive this error when they attempt to do a"Connection String" test. (see screenshot below)

 

The users said they have a good number of connetions strings that are getting this error when they perform a test.  Where can I go to start troubleshooting this issue?

We recently implemented a new watcher node server and I'm thinking this may be the issue, but I'm not sure how to troubleshoot it. 

Thanks for the assistance,


How do I apply an override for the logical Disk space monitor for an entire class for particular drive letter? SCOM 2012R2

$
0
0

New to SCOM...

I have a request from a user to not monitor the "G" drive for an entire group of servers.  The drives fills up quickly and the user does not want the "G" drive monitored or alerted when it reaches the threshold.  They don't want an alert at all when it comes to the "G" drive only. They still want to be alerted for any of the other drives on these particular servers.

Now I know if I apply the override to a single server, it will allow me to choose the "G" drive and I can set the override.  I noticed when I want to apply this override to entire class of server I don't have the option to pick the drive letter?

How can I accomplish this task? Am I going about it the wrong way by choosing the class to block off the servers? Should I create a group and do it that way?

I chose a class because all the servers have a particular service in common and that's how I separated the special servers from all other Windows servers. I could not use the Computer name because there is not a commonality when it comes to the name.

Thanks for any help you all can provide. 

SCOM is slow when you do changes

$
0
0

Hi,

My SCOM is extremely slow when I do changes. Exemple when I create a new Group, create a new view, monitor, rule. Or edit a Group, view, monitor, rule.

After I have pressed save button I need to wait for about 3 minutes before I can use the scom console again. It is completely freezed. If I try to use SCOM console on another management server it is freezed there to.

What can I do to speed this enviroment up? My cpu and ram are not maxed out on either the management servers or database.

BR

Askunge

Identify SCOM agents that do not have an SCCM client

$
0
0
I would like to identify SCOM agents that do not have an SCCM client installed.  I have the SCCM mp installed as well as the SCCM client health mp provided by Tao Yang installed.  I believe I could create my own registry discovery to identify if the SCCM install exists, but was wondering if there was a way that could leverage the existing SCCM mps I have in place instead of duplicating efforts.  

Office 365 Monitoring using SCOM 2012 R2

SCOM 2012 Design questions?

$
0
0

While design SCOM 2012 , what are important things to be noticed ? like Environment to be monitored , Budget , Network Bandwith , Application to be monitor ..etc

Like this any other important things to be noticed. 

Create simple windows service monitor with powershell

$
0
0

Hi!

Is it possible to create a windows service monitor using powershell. A monitor that check if a service is started or stopped.

I mean create it in the operations manager shell. Or maybe with VB?

Some system rules failed to load.

$
0
0

Hello Every one

i have a problem with my Monitoring ,the alert which i receive continuously in My SCOM  2012 motoring console is..

 

The System Center Management Health Service 123-31234  running on host xxx-xxxx.Root.net and serving management group with id {0407FB6F-896A-7389-EA01-D60C72ABBD5A} is not healthy. Some system rules failed to load.

I restarted the Service System center Management Service,also delete the folder health service State folder to clear the cache,but still the problem is there.

and i am getting this message in the Event logs of faulty system

Faulting application name: MonitoringHost.exe, version: 7.0.8560.0, time stamp: 0x4f210669
Faulting module name: MSVCR100.dll, version: 10.0.40219.325, time stamp: 0x4df2bcac
Exception code: 0x40000015
Fault offset: 0x00000000000761c9
Faulting process id: 0xc2c
Faulting application start time: 0x01cfb546b794c320
Faulting application path: C:\Program Files\System Center Operations Manager\Agent\MonitoringHost.exe
Faulting module path: C:\Windows\SYSTEM32\MSVCR100.dll
Report Id: 00042e99-213a-11e4-93f9-f4ce46830654
Faulting package full name: 

and the event id is 1000

Thank You!


Event 7022 appearing on management server

$
0
0

Hi

I'm now running 4 servers, Win Server 2012 R2 x64. Both SQL servers are running SQL server 2012 SP2 x64. 

On both of the management servers i'm getting an error, event 7022 which states:

"The Health Service has downloaded secure configuration for management group <management group>, and processing the configuration failed with error code Keyset does not exist(0x80090016).

Is anyone able to shed any light on this? It's worth mentioning, this has only just been installed in the last 24 hours. 

David.

OpsMgr Computer Network Adapter

$
0
0
I have OpsMgr 2012 SP1 installed and I am getting to know it.  If I go to the "Healthy" from the Home Page on the Console I get a list of all my servers\clients. There is a row called "Computer Network Adapter" and all the clients say "Not Monitored".  Is this normal, how to I enable "Computer Network Adapter"?

Jason

Visio SCOM Add-In - Distributed Application Export not Contacting Management Server

$
0
0

I have installed the Visio 2010 SCOM Add-In to my copy of Visio 2013 (since there is no 2013 Add-in and there seemed to be enough articles that it *should* work). I can connect to my Management server from a blank diagram and add objects without issue, although I seem to have to reconnect every time I start a new drawing. Not that the configuration is gone, I just can't do anything until I go into Configure and click OK. The real issue though is that when I go into SCOM and export a Distributed Application as a Visio Diagram and then open it in Visio, it is not connecting to the Management server and none of the objects seem to have any SCOM data associated with them. I have tried manually linking the objects in the drawing to SCOM objects but this does not work, even though I can see the SCOM objects.

For reference, I am doing all of this work on my Win7 machine with Visio 2013. I have the SCOM console installed on my machine. SCOM is SCOM2012 R2 running on a 2012 server.

Thanks for any suggestions.

My Operationsmanager 2007 R2 console keeps crashing and i get the below error.

$
0
0

My Operationsmanager 2007 R2 console keeps crashing and i get the below error.

Can any one please help.

Description:
  Stopped working

Problem signature:
  Problem Event Name:CLR20r3
  Problem Signature 01:microsoft.mom.ui.console.exe
  Problem Signature 02:6.0.4900.0
  Problem Signature 03:4a04f2c6
  Problem Signature 04:mscorlib
  Problem Signature 05:2.0.0.0
  Problem Signature 06:5174de33
  Problem Signature 07:20cd
  Problem Signature 08:143
  Problem Signature 09:N3CTRYE2KN3C34SGL4ZQYRBFTE4M13NB
  OS Version:6.1.7601.2.1.0.274.10
  Locale ID:1033

Read our privacy statement online:
  http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409

If the online privacy statement is not available, please read our privacy statement offline:
  C:\Windows\system32\en-US\erofflps.txt


Gautam.75801


SCOM 2012 r2 - User Roles with diferents access

$
0
0

Hello, 
I am creating different user profiles. In this case two types, one for network admin another for servers admin. 
My goal is that each user can not see the data from the other team. The server admin can not see data on the network, and vice versa. 
I managed to create different access to MP, views, dashboars and reports. In the reports i only give access only some of them. 

However need access to reports of availability, which are in the Microsoft Generic Report Library. What happens here you can see the information of the servers and network in the two users. 
What can I do to limit this? How can i create a separation on the reports?

Thank you, 
Rui

problem in requesting certificate from enterprice CA

$
0
0

I have an enterprice CA and I created a new certificate template for SCOM authentication, and when I submit a certificate from web enrollment I got this error massege:

Certificate Request Denied


Your certificate request was denied.

Your Request Id is 63. The disposition message is "Denied by Policy Module 0x80094800, The request was for a certificate template that is not supported by the Active Directory Certificate Services policy: SCOM Template.".

Contact your administrator for further information.

I checked the authentication and make it: everyone full control. when I request a certificate from the same CA with another template it works well without any errors !!


please feed me back with any suggestions

 


Hossam Wael Elmosallamy IT Support Engineer ECC Solutions MCSE - CCNA hossam.wael@eccsolutions.net Mobile: +2(014)-9464671 Work: +202-3828-4576 www.eccsolutions.net "Experience Reliability"

SCOM 2012 No heartbeat or "failed to connect" alerts.

$
0
0

Hey all,

Have SCOM 2012 monitoring a whole bunch of (mostly 2008 R2) boxes in our environment. Obviously the end goal is to receive text and e-mail alerts whenever a computer is down, but right now there aren't even any alerts being generated. We've had a couple of servers drop but no alert generated. Now I didn't build the SCOM box, so I'm not sure what wasn't configured from the get-go, but I have been able to successfully set up monitors for drive space issues. I would just love to do the same with ping, heartbeat,"failed to connect", etc alerts, but it seems like I'm missing some crucial components here.

I know that's not a ton of information to work with, but if anyone can point me in the right direction and at least help me ensure that the proper alerts are generated, that would be a tremendous help.

Thanks in advance.


2012 R2 Heartbeat failure issues

$
0
0
Running 2012 R2.  We appear to be getting Heartbeat Alerts on 2 of our Linux servers (out of approximately 54 other AIX and Linux servers).  When I select the alert and run all of the diagnostics that reside in the Health Exployer they all complete successfully without issue.  I have tried doubling the attempts to 4 (was original the default of 4) and increasing the time from 630 seconds to 1230 seconds.  What am I overlooking?

Unable to generate two Exchange 2010 reports

$
0
0

i

I am using SCOM 2007 R2 and I am not able to pull the below Exchange 2010 reports in SCOM. till Last month its working fine and now the issue started.

1. Report Name: Microsoft.Exchange.2010.Reports.Transport.Platform.TopUsers
Error Message

Date: 2014-09-12 22:02:22
Application: System Center Operations Manager 2007 R2
Application Version: 6.1.7221.81
Severity: Error
Message: Cannot initialize report.

Microsoft.Reporting.WinForms.ReportServerException: An internal error occurred on the report server. See the error log for more details. (rsInternalError) ---> Microsoft.Reporting.WinForms.ReportServerException: For more information about this error navigate to the report server on the local server machine, or enable remote errors
   --- End of inner exception stack trace ---
   at Microsoft.Reporting.WinForms.ServerReport.GetExecutionInfo()
   at Microsoft.Reporting.WinForms.ServerReport.GetParameters()
   at Microsoft.EnterpriseManagement.Mom.Internal.UI.Reporting.Parameters.ReportParameterBlock.Initialize(ServerReport serverReport)
   at Microsoft.EnterpriseManagement.Mom.Internal.UI.Console.ReportForm.SetReportJob(Object sender, ConsoleJobEventArgs args)
Microsoft.Reporting.WinForms.ReportServerException: For more information about this error navigate to the report server on the local server machine, or enable remote errors

2.Microsoft.Exchange.2010.Reports.SLA
Error Message:
An error has occured during report processing.
Query execution failed for dataset 'OutageBreakdown'
For more information about this error navigate to the report server on the local server machine, or enable remote errors.

Please help us to resolve this issue.

 

Donald D'souza (http://donald-scom.blogspot.com/)

Alert does not trigger if Microsoft exchange monitoring correlation service stops

$
0
0

I am using SCOM 2012 R2 edition. We monitor Exchange servers in this. We have a service called Microsoft Exchange monitoring correlation in the Management server. This service is used so the Management server to collect exchange related alerts in the Management server  from its Exchange Agents.

If this service is stopped SCOM will not throw Exchange alerts.

When this service is stopped in my MS previously a alert used to come in the console saying the "Microsoft exchange monitoring Correlation service is not running"

Now i am not at all getting this alert if the Microsoft exchange monitoring Correlation service stops.

I checked the and there were one Rule and monitor fro this service created to trigger alert if the service stops and it is a default alert and it is enabled. Not sure why the alert is not appearing in my console.

The target of the Rule is Root management server Emulator.

The Service monitor is also enabled by default and is targeting Monitoring Correlation Engine.

Also checked my MS's RMS Emulator role is also enabled.

Also checked the Event logs (Opsmanager) - There is no event generated for the service stop or start

Can any one please help.

 


Gautam.75801



Issue in Global Services Monitor GSM

$
0
0

Dear all,

I'm facing a problem in Global Services Monitor.

The Resources pool contains 4 Management Servers; 2 old and 2 recently installed.
The GSM was installed and was working normally on the old Management Servers.
But, after increasing the number of management servers to be 4 instead of two, the problem appeared.
The GSM is firing alerts on the new MS's and their state are critical (old 2 servers are healthy).
The alert description is as below:

Global Service Monitor Modules: Failed to discover Global Service Monitor locations.
Failure step: 'Couldn't get the ACS endpoint from discovery service. SubscriptionId: 'a6846da0-e5d7-4bea-ab13-836d89364b60', OutsideInServiceBaseUri: 'https://gsm-prod.systemcenter.microsoft.com/''
Message: 'Could not establish trust relationship for the SSL/TLS secure channel with authority 'gsm-prod.systemcenter.microsoft.com'.'
Details: 'System.ServiceModel.Security.SecurityNegotiationException: Could not establish trust relationship for the SSL/TLS secure channel with authority 'gsm-prod.systemcenter.microsoft.com'. ---> System.Net.WebException: The underlying connection was closed: Could not establish trust relationship for the SSL/TLS secure channel. ---> System.Security.Authentication.AuthenticationException: The remote certificate is invalid according to the validation procedure.
at System.Net.Security.SslState.StartSendAuthResetSignal(ProtocolToken message, AsyncProtocolRequest asyncRequest, Exception exception)
at System.Net.Security.SslState.StartSendBlob(Byte[] incoming, Int32 count, AsyncProtocolRequest asyncRequest)
at System.Net.Security.SslState.ProcessReceivedBlob(Byte[] buffer, Int32 count, AsyncProtocolRequest asyncRequest)
at System.Net.Security.SslState.StartReceiveBlob(Byte[] buffer, AsyncProtocolRequest asyncRequest)
at System.Net.Security.SslState.StartSendBlob(Byte[] incoming, Int32 count, AsyncProtocolRequest asyncRequest)
at System.Net.Security.SslState.ProcessReceivedBlob(Byte[] buffer, Int32 count, AsyncProtocolRequest asyncRequest)
at System.Net.Security.SslState.StartReceiveBlob(Byte[] buffer, AsyncProtocolRequest asyncRequest)
at System.Net.Security.SslState.StartSendBlob(Byte[] incoming, Int32 count, AsyncProtocolRequest asyncRequest)
at System.Net.Security.SslState.ProcessReceivedBlob(Byte[] buffer, Int32 count, AsyncProtocolRequest asyncRequest)
at System.Net.Security.SslState.StartReceiveBlob(Byte[] buffer, AsyncProtocolRequest asyncRequest)
at System.Net.Security.SslState.StartSendBlob(Byte[] incoming, Int32 count, AsyncProtocolRequest asyncRequest)
at System.Net.Security.SslState.ForceAuthentication(Boolean receiveFirst, Byte[] buffer, AsyncProtocolRequest asyncRequest)
at System.Net.Security.SslState.ProcessAuthentication(LazyAsyncResult lazyResult)
at System.Threading.ExecutionContext.RunInternal(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean preserveSyncCtx)
at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean preserveSyncCtx)
at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state)
at System.Net.TlsStream.ProcessAuthentication(LazyAsyncResult result)
at System.Net.TlsStream.Write(Byte[] buffer, Int32 offset, Int32 size)
at System.Net.PooledStream.Write(Byte[] buffer, Int32 offset, Int32 size)
at System.Net.ConnectStream.WriteHeaders(Boolean async)
--- End of inner exception stack trace ---
at System.Net.HttpWebRequest.GetResponse()
at System.ServiceModel.Channels.HttpChannelFactory`1.HttpRequestChannel.HttpChannelRequest.WaitForReply(TimeSpan timeout)
--- End of inner exception stack trace ---

Server stack trace: 
at System.ServiceModel.Channels.HttpChannelUtilities.ProcessGetResponseWebException(WebException webException, HttpWebRequest request, HttpAbortReason abortReason)
at System.ServiceModel.Channels.HttpChannelFactory`1.HttpRequestChannel.HttpChannelRequest.WaitForReply(TimeSpan timeout)
at System.ServiceModel.Channels.RequestChannel.Request(Message message, TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs, TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannelProxy.InvokeService(IMethodCallMessage methodCall, ProxyOperationRuntime operation)
at System.ServiceModel.Channels.ServiceChannelProxy.Invoke(IMessage message)

Exception rethrown at [0]: 
at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
at Microsoft.SystemCenter.Cloud.SharedLibrary.Discovery.IDiscovery.GetEndpoints(String subscriptionId)
at Microsoft.SystemCenter.Cloud.SharedLibrary.Discovery.DiscoveryHelper.<>c__DisplayClass1.<DiscoverAcsEndpoint>b__0(IDiscovery service)
at Microsoft.SystemCenter.Cloud.SharedLibrary.RestCallHelper.ExecuteRestCall[TContract](Uri endpointUri, WebProxy webProxy, String accessToken, RestMethod`1 method)
at Microsoft.SystemCenter.Cloud.SharedLibrary.Discovery.DiscoveryHelper.DiscoverAcsEndpoint(String subscriptionId, Uri outsideInServiceBaseUri, WebProxy proxy)
at Microsoft.SystemCenter.Cloud.OutsideInUnitModule.DiscoveryWriteActionModule.Execute()'

Any clue?

Regards,
Khaled A. Hamad

Health Service Heartbeat Failure Alert for Generated when one Management Server Down,

$
0
0

Hi,

I have Two Management Server, every one manage about 100 server, when one Management Server goes down unexpected, I receive 100 Alert for 100 Server Health Service Heartbeat Failure.

My Question, why when the Management Server down, it send that all Managed agent Health Service Heartbeat Failure?

Is there a way to change this?

Viewing all 11941 articles
Browse latest View live


<script src="https://jsc.adskeeper.com/r/s/rssing.com.1596347.js" async> </script>