SCOM 1807. I am trying to import a management pack and am getting this error
Naming Conflict : Cannot import the Tasty Printer Monitoring management pack. A management pack with the same ID Tasty.Printer.Monitoring is currently in the import list.
This happened after I deleted the original version of this MP. Not sure where this import list is named or located.
Thanks,
Rene
We are about to do a side by side upgrade from 2012 r2 to 2019.
Can we dual home these agents during the upgrade and they still function? I read that its 2012 r2 > 2016 > 2019. I don't know if that path is just for the servers or the agents as well.
Thanks
SCOM 2016 with 1 MS in a trusted domain and now trying to connect a untrusted GW management server. I have the root CA, GW server FQDN cert and agent FQDN cert's. I have the GW approval tool in the GW install dir and momcertimport in a separate dir, along with the GW FQDN cert. I have run momcertimport successfully but in the GW event viewer:
The OpsMgr Connector connected to opsmrg.server.com, but the connection was closed immediately without authentication taking place. The most likely cause of this error is a failure to authenticate either this agent or the server . Check the event log on the server and on the agent for events which indicate a failure to authenticate
OpsMgr was unable to set up a communications channel to opsmrg.server.com and there are no failover hosts. Communication will resume when opsmrg.server.com is available and communication from this computer is allowed.
I am using the local system account on the GW. I followed:
http://systemcentermvp.com/2017/10/05/step-step-gateway-server-installation-scom-2016/
and
https://docs.microsoft.com/en-us/system-center/scom/deploy-install-gateway-server
I have imported the CA in trusted root CA machine account, the GW FQDN cert is in personal machine account and momimport has the GW FQDN cert. Still get the same error. I can ping the FQDN of the MS and ping it
As the title says, have you ever seen this before?
Both the "% Logical Disk Free Space 2003" AND the ""% Logical Disk Free Space 2008" are reporting on the same disk. In my dashboard view, the same disk is showing up twice, once for each monitor.
Both the 2003 and 2008 management packs see the C: drive but only the Logical Disk 2003 sees the D: drive
The server is running 2008 R2 and the agent is healthy.
Strangest thing I've seen in a while from SCOM.
I am unable to use my Oeprations manager client on Windows 10. The full error is pasted below
Date: 28/03/2019 10:19:36
Application: Operations Manager
Application Version: 7.2.11719.0
Severity: Error
Message: Operations Manager has encountered an error.
System.UnauthorizedAccessException: Attempted to perform an unauthorized operation.
at Microsoft.EnterpriseManagement.Monitoring.Console.DataModel.NodeProvider.WunderbarNodeProvider.GetChildNodes(Uri providerRoot, NavigationModelNodeBase parentNode)
at Microsoft.EnterpriseManagement.ConsoleFramework.NavigationModelAdaptor.GetChildNodes(DataQueryBase query, NavigationModelNodeBase parentNode, String outputCollectionName)
at Microsoft.EnterpriseManagement.ConsoleFramework.NavigationModelAdaptor.OnProviderNodesChanged(Object sender, NodesChangedEventArgs e)
at Microsoft.EnterpriseManagement.ConsoleFramework.NavigationNodeProvider.RaiseNodesChangedEvent(NavigationModelNodeBase parentNode)
at Microsoft.EnterpriseManagement.Monitoring.Console.DataModel.NodeProvider.WunderbarNodeProvider.DataConnectionRefresh(ManagementGroupDataSource mgDataSource)
at Microsoft.EnterpriseManagement.Monitoring.Console.DataModel.NodeProvider.WunderbarNodeProvider.DataConnectionRefreshHandler(Object src, EventArgs args)
at Microsoft.EnterpriseManagement.Monitoring.Console.Common.DataModel.DataSource.ManagementGroupDataSource.SetDataProvider(IManagementGroupSession dataProviderService)
at Microsoft.EnterpriseManagement.Monitoring.Console.Internal.ConsoleWindow.ConnectToManagementGroupJob(Object sender, ConsoleJobEventArgs args)
at Microsoft.EnterpriseManagement.ConsoleFramework.WindowJobRecord.ExecuteBackgroundJob(Object sender, ConsoleJobEventArgs eventargs)
at Microsoft.EnterpriseManagement.Mom.Internal.UI.Console.ConsoleJobExceptionHandler.ExecuteJob(IComponent component, EventHandler`1 job, Object sender, ConsoleJobEventArgs args)
any suggestions appreciated. I am okay accessing the console on the server, so it appears to be a PC issue. The client has been working okay for a month prior to this error.
Hello,
We have done for SCOM Windows Agent failover between two GW Server.
now wants to know how to do with scom linux agent failover between Two gateway Server.
Thanks
Rich
SCOM 2012 R2
How do I add data to the custom fields section of an alert?
This is my scenario:
I'm using System center Orchestrator to monitor new and updated alerts. Then I'm taking certain alerts and automatically forwarding them to our ticketing system. I have a request to take ALL alerts from a specified SCOM management pack (i.e. "Mgmt Pack A") and forward them to a particular queue in our ticketing system.
My thought process was to figure a method to write data to a custom field (i.e. Custom Field :1) in all alerts from "Mgmt Pack A" and then use SCORCH to filter all alerts with that data. Once I have all the alerts filtered, I can easily forward them to the correct queue in or ticketing system.
1. Can I use Powershell to write data to the custom fields of an alert, if so what code can I use top point me in the right direction.
2. is it possible to write to the custom field section for ALL alerts coming from a specific management pack in SCOM?
Kind Regards and thank you.
Sorry if this is a noob question cause I am a noob to SCOM.
Our monitoring guys noticed that the RestartHealthService.ps1 script is running from temp as unrestricted.
Is this common or best practice? This is a new environment that was just migrated. I do not beleive the settings were changed .
I would expect to see all signed not unrestricted.
Cyndy
Hi,
I need to monitor the physical discs in our HP ProLiant server machines to detect any failures and we intent to do this using SCOM 1801.
appreciate let me know recommended approach/steps or the recommend management packs to achieve this task by using SCOM.
Thanks,
Dilan
Hello Everyone,
I am trying to integrate SCOM 2016 with HPE 3PAR Storeserv. I have followed the exact same procedure as provided in document provided to install MP on my MS's(we have three MS):
We have a separate team that manages HP 3PAR storage devices. They do not use HP oneview. So does this mean that storage Team have to seperately integrate HP oneView with their Storage device(HP 3PAR)?
The Appliance that i am trying to add is HP 3PAR's Storage device IP Address and i get below error
"Unable to add Appliance "
Error Code : 2: Connection Failure
what precaution should be taken from Storage Team?
I was able to add device(HP 3PAR) via HPE Management configuration user Tool
Thanks,
TechieGirl
The agent discovery is not working suddenly in our SCOM 2016 environment...
Please help over here...
Thanks, Shiva ravichandran.
Hi All,
I am trying to set scheduled maintenance mode for several computers in SCOM 2016. The schedules are already set in SCCM, but we need them to be in SCOM as well for internal reasons.
The problem I am facing is when trying to run the script through powershell from SCOR I always get the error "The client has been disconnected from the server. Please call ManagementGroup.Reconnect() to reestablish the connection." In SCOM I find two event log entries corresponding to every scheduled task I am trying to add , one is a warning, the other an error. The warning mentions error number 547 class 16 , and the error has "the insert statement conflicted with the foreign key constraint" mentioning the DB table "FK_ScheduleEntity_BaseManagedEntity", "dbo.BaseManagedEntity", column "BaseManagedEntityId".
Below is the script:
$SiteCode = "XY" #changed for privacy reasons
$ProviderMachineName = "SCCM FQDN"
$initParams = @{}
if((Get-Module ConfigurationManager) -eq $null) {
Import-Module "$($ENV:SMS_ADMIN_UI_PATH)\..\ConfigurationManager.psd1" @initParams
Import-Module -Name OperationsManager
if((Get-PSDrive -Name $SiteCode -PSProvider CMSITE -ErrorAction SilentlyContinue) -eq $null) {
New-PSDrive -Name $SiteCode -PSProvider -Root $ProviderMachineName @initParams
}
Set-Location "$($SiteCode):\" @initParams
$connection = New-SCOMManagementGroupConnection -CollectionName $CollName
$Memebername=$Member.CNAccessMP
$MemberID=$Member.SMSID.Trim("GUID:")
$MainWindow=Get-CMMaintenanceWindow -CollectionName $CollName
if ($MainWindow -ne ""){
foreach ($MainW in $MainWindow){
$Freq=0
if ($MainW.RecurrenceType -eq 1){$Freq=1}
elseif ($MainW.RecurrenceType -eq 2){$Freq=4}
elseif ($MainW.RecurrenceType -eq 3){$Freq=8}
elseif ($MainW.RecurrenceType -eq 4){$Freq=16}
elseif ($MainW.RecurrenceType -eq 5){$Freq=0}
$ConvSch=Convert-CMSchedule -ScheduleString $Mainw.ServiceWindowSchedules
$FreqInt=0
if ($ConvSch.Day -eq 1){FreqInt=1}
elseif ($ConvSch.Day -eq 2){FreqInt=2}
elseif ($ConvSch.Day -eq 3){FreqInt=4}
elseif ($ConvSch.Day -eq 4){FreqInt=8}
elseif ($ConvSch.Day -eq 5){FreqInt=16}
elseif ($ConvSch.Day -eq 6){FreqInt=32}
elseif ($ConvSch.Day -eq 7){FreqInt=64}
New-SCOMMaintenanceSchedule -Name $CollName -MonitoringObjects $MemberID -ActiveStartTime $MainW.StartTime -Duration $MainW.Duration -FreqType $Freq -FreqInterval $FreqInt -ReasonCode PlannedOther }
}
}
Any ideas would be much appreciated, thanks!
Thank you, Mahesh Phalle
Hi,
How to fix Outlook 2010 Search box, I tryed all below option but still facing the same problem in outllok 2010.
1) Rebuilding the Index
2) Created new PST
3) Reinstalled Outllook and Created new PST
4) Fully Formatted Windows 8.1 Pro 64bit and Reinstalled Outllook 32 bit and Created new PST
Best Regards,
Ketan Morje
Hi guys,
has anyone an idea how to forward alerts from SCOM 2016/2019 to CheckMK (Nagios) without using SNMP Traps !?
I saw the Scom2Nagios Connector from a german guy but unfortunately it is not downloadable any longer...
Thanks in advance,
Markus
Hello,
facing grayout issue of management servers (in all the Management server resource pool [two members]). below is event log on one management server of resource pool as:-
Hello,
In SCOM, i've already imported the DELL MD storage array management pack suite.
Using DellDiscoveryutility.exe, discovered the MD storage arrays which creates ip.cfg file. After some time, the storage arrays gets discovered in SCOM console.
Right now we got new storage device, Dell EMC ME4024
I tried the same procedure to discover but it didn't get discovered. Is there any specific management pack need to be imported to discover ME storage array?
Regards,
Vijay
Dears,
I have a strange issue on windows 2016 server monitoring in our SCOM 2012 R2 environment.
When I open the health explorer of any win2016 server in SCOM, I observed two parameters for CPU, Memory etc. Please find the below screenshot. We have thresholds applied at 95% on Total CPU but Agents didn't trigger any alert for this.
Also when I look for the running monitors and rules on the agent, I see two entries on the agent end. Sample below.
Microsoft.Windows.Server.6.2.OperatingSystem.TotalCPUUtilizationTotal CPU Utilization Percentage
Microsoft.Windows.Server.10.0.OperatingSystem.TotalCPUUtilizationTotal CPU Utilization Percentage
How I can remove the windows 2012 MP rules for win2016 servers. Can someone update what is happening here.
Thanks,
Ramu Chittiprolu
Please try below DR command line to recover MP from grey out and this works fine for me.
-Open Command prompt with elevated access- SCOM Installation Media location
Setup.exe /silent /AcceptEndUserLicenseAgreement /recover /EnableErrorReporting:Never /SendCEIPReports:0 /UseMicrosoftUpdate:0 /InstallPath:"C:\Program Files\Microsoft System Center 2016\Operations Manager" /DatabaseName:OperationDBNAME/SqlServerInstance:SQLINSTANCENAME /DWDatabaseName:DWDBNAME /DWSqlServerInstance:DWINSTANCENAME /DASAccountUser:DOMAIN\OMDASACCOUNT /DASAccountPassword:PASSWORD /DatareaderUser:Domain\DATAREADERACOUNT /DatareaderPassword:PASSWORD /DataWriterUser:DOMAIN\DATAREADERACCOUNT /DataWriterPassword:PASSWORD/ActionAccountUser:DOMAIN\ACTIONACCOUNT /ActionAccountPassword:PASSWORD /ManagementGroupName:MPGROUPNAME