Hi guys,
In SCOM 2012 I found System Center Data Access Service non start, when I start it, itimmediately stop of start.
The Application EventID is : 1000 (100) and Operations Manager Event is : 26380
I have check SPN an correct it, the result was same.
Hi experts,
I just deployed a gateway:
1. Imported certificate chains on both MS and the gateway to the TRCA store of a Local computer
2. Imported MS certificate to the Personal store of a Local computer on the MS server
3. Imported gateway certificate to the Personal store of a Local computer on the gateway server
4. Approved the gateway with a GW approval tool
5. Imported certs to SCOM with momcertimport on both MS and the gateway server
5. Installed a gateway on the gateway server
Right away I started getting 20002 events - a device at X.X.X.X:XX
attempted to connect but could not be authenticated and was rejected. Any hints? The DNS resolution works fine, I can ping the servers both ways, I can telnet MS server from the gateway on 5723. Certificates show "OK" in the certification path and
they both contain private keys. The MOM registry entries reflect the thumbnails of the certificates in the store. Am I missing anything?
i have (scom 2012 sp1) with SQL 2008 r2 on windows server 2008 r2 and my manager asked me about compatibility to in place upgrade for SCOM 2016 and operating system and after searching there is no case like that so if anyone has an experience for that scenario can share his knowledge and recommendation
thanks
I have an agent that keeps resurrecting itself in the console, but the original server has been retired. I think the server was cloned at some point with the agent intact, and it's reporting into the management server with its old NETBIOS name. All I know is that I delete it, it comes back in a few minutes, and the name it's registered as does not resolve in DNS.
How can I figure out the actual hostname or IP address of an agent that is connecting to a management group?
Hello All,
For the purpose of monitoring netbotz i have installed the management pack from http://www.systemcentercentral.com/pack-catalog/netbotz-management-pack/
also , i have made the firewall configuration as seen in https://sxwhelpcenter.
Has anyone configured this ?? Can you please share me the integration details ?
Any help will be much appreciated.
Kindest Regards
-py
-py
Hi can anyone please help me regarding this issue
Thanks in advance!!!!
Date: 8/17/2012 1:07:39 PM
Application: Operations Manager
Application Version: 7.0.8560.0
Severity: Error
Message: Failed to connect to server 'Xxxxxxx.com'
Microsoft.EnterpriseManagement.Common.ServiceNotRunningException: The Data Access service is either not running or not yet initialized. Check the event log for more information. ---> System.ServiceModel.EndpointNotFoundException: Could not connect to
net.tcp://wm-flor-apvm199.wdw.disney.com:5724/DispatcherService. The connection attempt lasted for a time span of 00:00:03.0635942. TCP error code 10061: No connection could be made because the target machine actively refused it [::1]:5724. ---> System.Net.Sockets.SocketException:
No connection could be made because the target machine actively refused it [::1]:5724
at System.Net.Sockets.Socket.DoConnect(EndPoint endPointSnapshot, SocketAddress socketAddress)
at System.Net.Sockets.Socket.Connect(EndPoint remoteEP)
at System.ServiceModel.Channels.SocketConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
--- End of inner exception stack trace ---
Server stack trace:
at System.ServiceModel.Channels.SocketConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
at System.ServiceModel.Channels.BufferedConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
at System.ServiceModel.Channels.ConnectionPoolHelper.EstablishConnection(TimeSpan timeout)
at System.ServiceModel.Channels.ClientFramingDuplexSessionChannel.OnOpen(TimeSpan timeout)
at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannel.OnOpen(TimeSpan timeout)
at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannel.CallOnceManager.CallOnce(TimeSpan timeout, CallOnceManager cascade)
at System.ServiceModel.Channels.ServiceChannel.EnsureOpened(TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs, TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannelProxy.InvokeService(IMethodCallMessage methodCall, ProxyOperationRuntime operation)
at System.ServiceModel.Channels.ServiceChannelProxy.Invoke(IMessage message)
Exception rethrown at [0]:
at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
at Microsoft.EnterpriseManagement.Common.Internal.IDispatcherService.Connect(SdkClientConnectionOptions connectionOptions)
at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.Initialize(EnterpriseManagementConnectionSettings connectionSettings, SdkChannelObject`1 channelObjectDispatcherService)
at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.CreateEndpoint[T](EnterpriseManagementConnectionSettings connectionSettings, SdkChannelObject`1 channelObjectDispatcherService)
--- End of inner exception stack trace ---
at Microsoft.EnterpriseManagement.Common.Internal.ExceptionHandlers.HandleChannelExceptions(Exception ex)
at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.CreateEndpoint[T](EnterpriseManagementConnectionSettings connectionSettings, SdkChannelObject`1 channelObjectDispatcherService)
at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.ConstructEnterpriseManagementGroupInternal[T,P](EnterpriseManagementConnectionSettings connectionSettings, ClientDataAccessCore clientCallback)
at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.RetrieveEnterpriseManagementGroupInternal[T,P](EnterpriseManagementConnectionSettings connectionSettings, ClientDataAccessCore callbackDispatcherService)
at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.Connect[T,P](EnterpriseManagementConnectionSettings connectionSettings, ClientDataAccessCore callbackDispatcherService)
at Microsoft.EnterpriseManagement.ManagementGroup.InternalInitialize(EnterpriseManagementConnectionSettings connectionSettings, ManagementGroupInternal internals)
at Microsoft.EnterpriseManagement.ManagementGroup.Connect(ManagementGroupConnectionSettings connectionSettings)
at Microsoft.EnterpriseManagement.Mom.Internal.UI.Common.ManagementGroupSessionManager.Connect(String server)
at Microsoft.EnterpriseManagement.Monitoring.Console.Internal.ConsoleWindowBase.TryConnectToManagementGroupJob(Object sender, ConsoleJobEventArgs args)
System.ServiceModel.EndpointNotFoundException: Could not connect to net.tcp://xxxxxxxxxxxx.com:5724/DispatcherService. The connection attempt lasted for a time span of 00:00:03.0635942. TCP error code 10061: No connection could be made because the target machine
actively refused it [::1]:5724. ---> System.Net.Sockets.SocketException: No connection could be made because the target machine actively refused it [::1]:5724
at System.Net.Sockets.Socket.DoConnect(EndPoint endPointSnapshot, SocketAddress socketAddress)
at System.Net.Sockets.Socket.Connect(EndPoint remoteEP)
at System.ServiceModel.Channels.SocketConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
--- End of inner exception stack trace ---
Server stack trace:
at System.ServiceModel.Channels.SocketConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
at System.ServiceModel.Channels.BufferedConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
at System.ServiceModel.Channels.ConnectionPoolHelper.EstablishConnection(TimeSpan timeout)
at System.ServiceModel.Channels.ClientFramingDuplexSessionChannel.OnOpen(TimeSpan timeout)
at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannel.OnOpen(TimeSpan timeout)
at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannel.CallOnceManager.CallOnce(TimeSpan timeout, CallOnceManager cascade)
at System.ServiceModel.Channels.ServiceChannel.EnsureOpened(TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs, TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannelProxy.InvokeService(IMethodCallMessage methodCall, ProxyOperationRuntime operation)
at System.ServiceModel.Channels.ServiceChannelProxy.Invoke(IMessage message)
Exception rethrown at [0]:
at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
at Microsoft.EnterpriseManagement.Common.Internal.IDispatcherService.Connect(SdkClientConnectionOptions connectionOptions)
at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.Initialize(EnterpriseManagementConnectionSettings connectionSettings, SdkChannelObject`1 channelObjectDispatcherService)
at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.CreateEndpoint[T](EnterpriseManagementConnectionSettings connectionSettings, SdkChannelObject`1 channelObjectDispatcherService)
System.Net.Sockets.SocketException (0x80004005): No connection could be made because the target machine actively refused it [::1]:5724
at System.Net.Sockets.Socket.DoConnect(EndPoint endPointSnapshot, SocketAddress socketAddress)
at System.Net.Sockets.Socket.Connect(EndPoint remoteEP)
at System.ServiceModel.Channels.SocketConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
Hi, Does SCOM support monitoring of servers with ipv6 address and no ipv4?
If so please help me with links that help me understand more
Hi guys - I do see errors of this type and would love to disable the rule "Microsoft.Windows.WindowsDefenderATP.CollectEtwEvent" but I do not find it under authoring?!?!
Any hint/tip?
Thanks in advance!
Error04.12.2019 21:04:41HealthService4509Health Service"The constructor for the managed module type ""Microsoft.EnterpriseManagement.Mom.Modules.WindowsDefenderATPModule.WindowsDefenderATPModule"" threw an exception. This module was running in rule ""Microsoft.Windows.WindowsDefenderATP.CollectEtwEvent"" running for instance """" with id:""{97D734DE-E54B-1573-D12D-E993FA21977A}"" in management group ""AOI-b2c0fc79-bfc7-4e28-8809-0918c6532db1"".good day
I have windows 2016 file server and I need to monitor scheduled tasks, I deployed the scheduled task MP but it monitor only windows 2008/2012/2012R2
thanks in advance
Hello,
I am running SCOM 2012 R2 UR13. I was hit with ransomware, and my SCOM server was affected by this. Unfortunately my DB backups were also affected by the ransomware. My MP's that I export on a weekly basis were not affected. Is it possible to setup a new SCOM server, with the same name and IP address, and import the MP's without the DB?
Hello Team,
For 3 of my Production servers the alert: Server Service: File and Printer Sharing Ports Blocked is triggered via monitor
I have performed the required troubleshooting as mentioned in the Resolution in the Health Explorer
-------------------------------------------------------------------------
This object monitors firewall inbound rules for File and Printer Sharing and generates an alert if either the rules are disabled or the corresponding TCP ports 445 and 139 are blocked.
This monitor can enter a Critical health state for the following reasons:
| • | The Windows Firewall is not running. |
| • | Firewall rules for File and Printer Sharing targeting TCP port 445 or 139 are disabled. |
If the health state is unknown, it means that monitoring has not yet begun for this object.
Determine if Windows Firewall is enabled
To determine if Windows Firewall is enabled, use the following procedure:
1. At an elevated command prompt on the affected server, type: sc query mpssvcand press ENTER.
2. If the firewall is not running, type the following command: net start mpssvc.
Determine if port firewall rules are enabled
To determine if the firewall rules for the ports are enabled, use the following procedure:
1. Open the Control Panel on the affected server, click System and Security, and then clickWindows Firewall.
2. In the left pane, click Advanced Settings and then click Inbound Rules.
3. Check whether the following rules are enabled and the Action isAllow:
| • | File and Printer Sharing (NB-Session-In) |
| • | File and Printer Sharing (SMB-In) |
4. If the firewall rules are not enabled, click the rule, and on the Action menu, clickEnable Rule.
This monitor automatically resets to a Healthy state after you resolve the issue.
--------------------------------------------------------------------------
But still the issue persists onto my SCOM Console
Any hint on the same please so as the alerts gets resolved asap
from:
Sandy
The information in the Alert Context tab of an alert populates when the alert is thrown, and it does seem to update when an alert closes. 2 questions:
Obviously for an alert to throw some condition is met. In the case of a numeric threshold, such as some sort of performance data, it would be nice to see if this changes while remaining in the alerting threshold, without going to the trouble of also creating a separate performance collection rule.
For example you have a monitor that's checking a threshold every 5 minutes and returning data to SCOM. Property bags continue to be returned after the initial alert condition is detected - the values in these would possibly be useful to know, but it seems they're more or less ignored unless they trigger a state change.
I've been through SCOM documentation around alerting but can't find answers to the above questions.
any ideas on the fix for this ?
System.ServiceModel.CommunicationException: [HttpWebRequest_WebException_RemoteServer]Hello,
Is it possible to Multi-home the SCOM agent to both SCOM 2012R2 and SCOM 2019? We would like to have the SCOM client reporting to both systems before Decommissioning SCOM 2012R2.
Thanks
Hello,
I am trying to find a way if possible in SCOM how to monitor a specific value in from a webpage. I would like to monitor theheldJobsCount value and alert if it is greater than 1000. I am able to do it with powershell using Invoke-WebRequest but i would like to do it in SCOM. Our SCOM version in 2012R2. Thanks.
Ishan
Description:
Integrated SCOM 2019 to O365 subscription (by following steps from below link) Office 365 Monitoring using SCOM https://gallery.technet.microsoft.com/office/Office-365-using-SCOM-7b254a42
However getting an alert in SCOM 2019 stating "The monitor oversees the availability of connection to Office 365 API EndPoint" and data flow is not happening between SCOM and O365.
And the error is with global connection to Office 365 API EndPoint. Have double checked O365 Subscription's account and it is correct
Note: I am able to connect Azure Subscription successfully to SCOM 2019 Please advice and guide how to resolve the issue
See below the complete alert received in SCOM 2019.
***************************************
Connection State Source: O365Trial
Full Path Name: O365Trial
Alert Monitor: Office 365 Connection State monitor Created: 12/7/2019 6:30:04 AM
Alert Description Authorization message: Value cannot be null.
Parameter name: clientId
Endpoints message: Authorization failed
Summary The monitor oversees the availability of connection to Office 365 API EndPoint.
Causes An error state is caused by having issues with connecting to Office 365 API EndPoint. It can be caused by the following: • Issues with global connection to Office 365 API EndPoint.
• Credentials for Office 365 Subscription's account are not correct.
• Office 365 Subscription's account is not allowed to get data from Office 365 EndPoint API.
Thanks & Regards,
Balasubramanian.Murugesan
Hello Team,
As per the business requirement we need to ignore alerts a two peak time when CPU goes a HIGH spike.
So the business wants to have no alerts generated in that specific time interval (8 to 8:20 pm and 12:00 -12: 20 pm)
How can I re-configure my CPU monitor so that it ignores the alerts in that time window?
from:
Sandy
Hi All,
Is it possible to have SCOM perform a SQL query?
If the Output of the query is more than 50, an alert to be generated.
if Yes, kindly share us the details how can we monitor them in SCOM.
Regards
Kumar
Question for SCOM Admins:
We are running SCOM 2012 R2
We've been tasked to create a way for teams that don't have direct access to SCOM to place multiple servers in Maintenance Mode. Currently, teams will contact the SCOM Admins to place multiple servers in Maint Mode and we want to automate this task so the SCOM admins will not have to do this all the time.
How are companies doing this? What resources can you point me to that will help us with this task?
Our goal is to place multiple servers in Maintenance Mode for events such as patch week, software upgrades, etc.
thank you for your help.
