Hey guys,

I am investigating a strange case in which a client claims that after installing Office 2007 his data was freely accessible via Bluetooth without password. He used a longer password or fingerprints locally and would never have thought that his data would be openly accessible at the same time. He installed Office 2007 in an English version for students on Windows XP, heard that Groove might have been the reason.

Now the case became very important again and I tried to search the Knowledge Base for this weird bug. Unfortunately the support of Office 2007 has expired and Microsoft has removed all relevant entries.

Does anyone remember such an error? Moreover recollect the corresponding KB number?
I would appreciate any clue. Thanks a lot.

Best regards,
Daniel

Hello Team,

I had calculated the Availability Report for UNIX LINUX computers but for my 1 server availability is below 100% but

neither the agent is down or unhealthy / Nor the server was in maintenance mode (unplanned) but then also Availability is approx 77 % for last 1 week (26 feb 2019 - 5 march 2019).

I also analysed the Health Explorer to track the state change but there shows only 1 state change forCron job (a Task Scheduler for UNIX/LINUX for certain task or job execution) as the job count was greater then the set threshold the state changed from Healthy to Critical 

Any thoughts on how availability is calculated for UNIX LINUX servers.Is it different from that of Windows Computers?

from:

Sandy

Hi All,

Could it be possible to find out the monitors which are created through event id. I had created a monitor long time back through event id but is not able to find the monitor now. I have checked for all the possibilities but not successful.. Please help me on this.

Regards,

Ravi

I used the following link and application to create MP from MIB

https://blogs.technet.microsoft.com/allthat/2016/10/19/system-center-operations-manager-extensible-network-monitoring-management-pack-generator-tool/comment-page-1/#comment-6945

When i want to Generate MP i get this error

Management pack generation has failed.ERROR: Device node not found

Can anyone help me to resolve this ?

Regards,

SCOM is reporting an oledb: results error, cannot open database operationsmanagerdw.

the runas profile used is [default]. A check on default shows an account called scom-a is being used. This account does not have access to the operationsmanagerdw database. I guess it is just a matter of addding the required rights. But what rights should be added?

How should I troubleshoot this error. I get this error in my test server often but unable to troubleshoot. 

OpsMgr Management Configuration Service failed to execute 'GetNextWorkItem' engine work item due to the following exception

Microsoft.EnterpriseManagement.ManagementConfiguration.DataAccessLayer.DataAccessException: Data access operation failed
   at Microsoft.EnterpriseManagement.ManagementConfiguration.DataAccessLayer.DataAccessOperation.ExecuteSynchronously(Int32 timeoutSeconds, WaitHandle stopWaitHandle)
   at Microsoft.EnterpriseManagement.ManagementConfiguration.SqlConfigurationStore.ConfigurationStore.ExecuteOperationSynchronously(IDataAccessConnectedOperation operation, String operationName)
   at Microsoft.EnterpriseManagement.ManagementConfiguration.SqlConfigurationStore.ConfigurationStore.GetNextWorkItem(IEnumerable`1 workItemDescriptorList)
   at Microsoft.EnterpriseManagement.ManagementConfiguration.Engine.SharedWorkItemFactory.CreateFactorySpecificWorkItem()
   at Microsoft.EnterpriseManagement.ManagementConfiguration.Engine.WorkItemFactory.CreateWorkItem()
   at Microsoft.EnterpriseManagement.ManagementConfiguration.Engine.WorkItemManager.TryGetNextWorkItem(IConfigServiceEngineWorkItem& workItem)
   at Microsoft.EnterpriseManagement.ManagementConfiguration.Engine.WorkItemManager.GetNextWorkItem()
   at Microsoft.EnterpriseManagement.ManagementConfiguration.Engine.ConfigServiceEngine.EngineMainThread()
-----------------------------------
System.Data.SqlClient.SqlException (0x80131904): Sql execution failed. Error 1105, Level 17, State 2, Procedure WorkItemGetNext, Line 122, Message: Could not allocate space for object 'CS.WorkItem'.'PK_WorkItem' in database 'OperationsManagerNew' because the 'PRIMARY' filegroup is full. Create disk space by deleting unneeded files, dropping objects in the filegroup, adding additional files to the filegroup, or setting autogrowth on for existing files in the filegroup.
   at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction)
   at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj, Boolean callerHasConnectionLock, Boolean asyncClose)
   at System.Data.SqlClient.TdsParser.TryRun(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj, Boolean& dataReady)
   at System.Data.SqlClient.SqlDataReader.TryConsumeMetaData()
   at System.Data.SqlClient.SqlDataReader.get_MetaData()
   at System.Data.SqlClient.SqlCommand.FinishExecuteReader(SqlDataReader ds, RunBehavior runBehavior, String resetOptionsString, Boolean isInternal, Boolean forDescribeParameterEncryption, Boolean shouldCacheForAlwaysEncrypted)
   at System.Data.SqlClient.SqlCommand.CompleteAsyncExecuteReader(Boolean isInternal, Boolean forDescribeParameterEncryption)
   at System.Data.SqlClient.SqlCommand.InternalEndExecuteReader(IAsyncResult asyncResult, String endMethod, Boolean isInternal)
   at System.Data.SqlClient.SqlCommand.EndExecuteReaderInternal(IAsyncResult asyncResult)
   at System.Data.SqlClient.SqlCommand.EndExecuteReader(IAsyncResult asyncResult)
   at Microsoft.EnterpriseManagement.ManagementConfiguration.DataAccessLayer.ReaderSqlCommandOperation.SqlCommandCompleted(IAsyncResult asyncResult)
ClientConnectionId:2081d3af-edd3-4122-af80-25a44b840316
Error Number:50000,State:1,Class:17

Hi Sir, 

We have imported Azure management pack to one of the management server. We see that server goes to grayed out state often. Once we restart SCOM services, it comes back online but triggers the below alert. 

"Microsoft Azure HTTP operation has failed" 

We recently configured subscription for Azure notification, will that be the cause for this alert. Moreover, the solution says to install UCMA runtime, installing this wouldn't create any problem to management server right? Pre-requisite for UCMa is .net 3.5 , shall I install that as well. Your replies helps a lot. Thank you.

Hi all ..

I am encountering a strange issue with my SCOM 2016 (UR5) environment with the Network Device Discovery.

The Discovery rule is set for Explicit discovery and all the devices we wish to monitor are included and they're all UPS devices across the org.  The devices are listed by IP address with SNMP Version set to V1 or V2, Port 161 and Access Mode = ICMP only.

I have 12 devices listed in the Pending Device Management all with No Response SNMP.  Am I missing something here?  If the discovery is set to ICMP only then why is it failing on SNMP ?  And there are 2 devices that are correctly discovered using ICMPONLY but also appear in the Pending area with the same No Response SNMP message.  If I look at the properties of these 2 devices it says ICMPONLY, Certification = UNDISCOVERED.  Port Number = 161. SNMP Version = 2 Supports SNMP = False.

These are the only 2 devices that are actually "correctly" discovered, all others aren't at all.

Am confused so any guidance or assistance would be gratefully appreciated.

I Used https://www.stefanroth.net/2016/06/02/scom-2016-network-monitoring-mp-generator-tool/ and i can create MP from MIB and import to scom

The problem is i want to show for example UsedMemory as a counter in a performance view

But in the MP i cant define counter

HI guys,

Need help!!!

I am not able to open my operations console as the below error is coming. Screen shot attached.

How to enable the clr enabled configuration option?

In the event logs, i can see the below error

AD

Morning,

Is there a feature comparison table somewhere? We are currently on 2012R2, UR12. The plan was to do an in place upgrade to 2016 so that I could attempt to keep all the rules, overrides, tweaks,... that have been made. Then test and make any necessary changes so that I could then move to upgrade the prod environment in the same manner. We could then at a future point do a new 1801, 1807 ?? and move those changes to the newer environment.

I was not too shocked to find out that Microsoft has not invested in ANY tools for the SCOM community to assist in successfully migrating those hard won changes to a new environment! Instead, we are left to our own devices to figure out a method (as in totally recreate all those changes) to put all of those into a new environment. Our environment is small compared to most others, but it is still a huge man hour task and inconvenience to our customers to have to go back though all of this again!!

How customer focused is that?!!!!!

Anyhow, off my soapbox! 

Assistance and suggestions needed!

Thanks,

Tony

I recently upgraded my environment from SCOM 2012 R2 to 1807. All of my agents are fine except for two that are unable to download a configuration. Pretty much the only events o appear in the Operations Manager event log are ID 21023, "OpsMgr has no configuration for management group...". I also discovered that both servers no longer have a "Microsoft Monitoring Agent RunAs Account Encryption" self-signed certificate, which I assume is the root of the problem. The agents appear to Heartbeat fine, but they are no longer loading management packs, so resources like websites and app pools are no longer being monitored. These two computers are nearly identical as they are hosts of their own web farm, so I am not surprised both are having the same problem, however, they were fine prior to the agent upgrade.

I came across this blog that was dealing with a similar issue. I checked the C:\ProgramData\Microsoft\Crypto\Keys ACL but the permissions seemed fine. I did run procmon while starting the Health Service, but did not find anything being denied.

Is it possible to run some command to force an agent certificate to be generated? We are hoping to retire this web farm in the near future, so a "duct-tape job" will be fine if that is what it takes. Thanks

Hi,

I have recently installed SCOM 1801 and tried pushing an agent on a test server. When I look at the agent files there are only two folders located as below. Is this normal? As in SCOM 2012 there are many. Also that server is healthy on the console.

Sameer Lahane

Hi,

I have built new SCOM 1801 infra for our client. We are currently using SCOM 2012 SP1. I now want to migrate all the agents from SCOM2012 to SCOM 1801. How can I achieve it with maximum precision? Coz there are many overrides applied on different agents and I want to make sure all the configurations are as it is in new SCOM 1801. Is there any smart way to do it or manual configuration of overrides and its thresholds is the only option? Kindly help.

Sameer Lahane

Hi,

I have a single management server running 1807. When I try to add a server in maintenance mode for 10 mins, the console takes forever, It just stays in the busy state. SQL is local to the management server. This happens even if I try to create a daily schedule. 

Please help.

Thanks, Rajiv

Hi,

SCOM Environment: Single Server Management Group

After rebooting the server, I am unable to connect to the server using console. 

Below is the error msg:

Date: 09-03-2019 13:00:32
Application: Operations Manager
Application Version: 7.3.13261.0
Severity: Error
Message: Failed to connect to server 'ServerName'

Microsoft.EnterpriseManagement.Common.ServiceNotRunningException: The Data Access service is either not running or not yet initialized. Check the event log for more information. ---> System.ServiceModel.EndpointNotFoundException: Could not connect to net.tcp://ServerName:5724/DispatcherService. The connection attempt lasted for a time span of 00:00:02.0023018. TCP error code 10061: No connection could be made because the target machine actively refused it 172.30.8.53:5724.  ---> System.Net.Sockets.SocketException: No connection could be made because the target machine actively refused it 172.30.8.53:5724
   at System.Net.Sockets.Socket.DoConnect(EndPoint endPointSnapshot, SocketAddress socketAddress)
   at System.Net.Sockets.Socket.Connect(EndPoint remoteEP)
   at System.ServiceModel.Channels.SocketConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
   --- End of inner exception stack trace ---

Server stack trace: 
   at System.ServiceModel.Channels.SocketConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
   at System.ServiceModel.Channels.BufferedConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
   at System.ServiceModel.Channels.ConnectionPoolHelper.EstablishConnection(TimeSpan timeout)
   at System.ServiceModel.Channels.ClientFramingDuplexSessionChannel.OnOpen(TimeSpan timeout)
   at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
   at System.ServiceModel.Channels.LayeredChannel`1.OnOpen(TimeSpan timeout)
   at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
   at System.ServiceModel.Channels.ServiceChannel.OnOpen(TimeSpan timeout)
   at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
   at System.ServiceModel.Channels.ServiceChannel.CallOpenOnce.System.ServiceModel.Channels.ServiceChannel.ICallOnce.Call(ServiceChannel channel, TimeSpan timeout)
   at System.ServiceModel.Channels.ServiceChannel.CallOnceManager.CallOnce(TimeSpan timeout, CallOnceManager cascade)
   at System.ServiceModel.Channels.ServiceChannel.EnsureOpened(TimeSpan timeout)
   at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs, TimeSpan timeout)
   at System.ServiceModel.Channels.ServiceChannelProxy.InvokeService(IMethodCallMessage methodCall, ProxyOperationRuntime operation)
   at System.ServiceModel.Channels.ServiceChannelProxy.Invoke(IMessage message)

Exception rethrown at [0]: 
   at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
   at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
   at Microsoft.EnterpriseManagement.Common.Internal.IDispatcherService.Connect(SdkClientConnectionOptions connectionOptions)
   at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.Initialize(EnterpriseManagementConnectionSettings connectionSettings, SdkChannelObject`1 channelObjectDispatcherService)
   at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.CreateEndpoint[T](EnterpriseManagementConnectionSettings connectionSettings, SdkChannelObject`1 channelObjectDispatcherService)
   --- End of inner exception stack trace ---
   at Microsoft.EnterpriseManagement.Common.Internal.ExceptionHandlers.HandleChannelExceptions(Exception ex)
   at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.CreateEndpoint[T](EnterpriseManagementConnectionSettings connectionSettings, SdkChannelObject`1 channelObjectDispatcherService)
   at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.ConstructEnterpriseManagementGroupInternal[T,P](EnterpriseManagementConnectionSettings connectionSettings, ClientDataAccessCore clientCallback)
   at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.RetrieveEnterpriseManagementGroupInternal[T,P](EnterpriseManagementConnectionSettings connectionSettings, ClientDataAccessCore callbackDispatcherService)
   at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.Connect[T,P](EnterpriseManagementConnectionSettings connectionSettings, ClientDataAccessCore callbackDispatcherService)
   at Microsoft.EnterpriseManagement.ManagementGroup.InternalInitialize(EnterpriseManagementConnectionSettings connectionSettings, ManagementGroupInternal internals)
   at Microsoft.EnterpriseManagement.Mom.Internal.UI.Common.ManagementGroupSessionManager.Connect(String server)
   at Microsoft.EnterpriseManagement.Monitoring.Console.Internal.ConsoleWindowBase.TryConnectToManagementGroupJob(Object sender, ConsoleJobEventArgs args)
System.ServiceModel.EndpointNotFoundException: Could not connect to net.tcp://mmfss-omprod.mmfsl.com:5724/DispatcherService. The connection attempt lasted for a time span of 00:00:02.0023018. TCP error code 10061: No connection could be made because the target machine actively refused it 172.30.8.53:5724.  ---> System.Net.Sockets.SocketException: No connection could be made because the target machine actively refused it 172.30.8.53:5724
   at System.Net.Sockets.Socket.DoConnect(EndPoint endPointSnapshot, SocketAddress socketAddress)
   at System.Net.Sockets.Socket.Connect(EndPoint remoteEP)
   at System.ServiceModel.Channels.SocketConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
   --- End of inner exception stack trace ---

Server stack trace: 
   at System.ServiceModel.Channels.SocketConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
   at System.ServiceModel.Channels.BufferedConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
   at System.ServiceModel.Channels.ConnectionPoolHelper.EstablishConnection(TimeSpan timeout)
   at System.ServiceModel.Channels.ClientFramingDuplexSessionChannel.OnOpen(TimeSpan timeout)
   at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
   at System.ServiceModel.Channels.LayeredChannel`1.OnOpen(TimeSpan timeout)
   at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
   at System.ServiceModel.Channels.ServiceChannel.OnOpen(TimeSpan timeout)
   at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
   at System.ServiceModel.Channels.ServiceChannel.CallOpenOnce.System.ServiceModel.Channels.ServiceChannel.ICallOnce.Call(ServiceChannel channel, TimeSpan timeout)
   at System.ServiceModel.Channels.ServiceChannel.CallOnceManager.CallOnce(TimeSpan timeout, CallOnceManager cascade)
   at System.ServiceModel.Channels.ServiceChannel.EnsureOpened(TimeSpan timeout)
   at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs, TimeSpan timeout)
   at System.ServiceModel.Channels.ServiceChannelProxy.InvokeService(IMethodCallMessage methodCall, ProxyOperationRuntime operation)
   at System.ServiceModel.Channels.ServiceChannelProxy.Invoke(IMessage message)

Exception rethrown at [0]: 
   at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
   at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
   at Microsoft.EnterpriseManagement.Common.Internal.IDispatcherService.Connect(SdkClientConnectionOptions connectionOptions)
   at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.Initialize(EnterpriseManagementConnectionSettings connectionSettings, SdkChannelObject`1 channelObjectDispatcherService)
   at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.CreateEndpoint[T](EnterpriseManagementConnectionSettings connectionSettings, SdkChannelObject`1 channelObjectDispatcherService)
System.Net.Sockets.SocketException (0x80004005): No connection could be made because the target machine actively refused it 172.30.8.53:5724
   at System.Net.Sockets.Socket.DoConnect(EndPoint endPointSnapshot, SocketAddress socketAddress)
   at System.Net.Sockets.Socket.Connect(EndPoint remoteEP)
   at System.ServiceModel.Channels.SocketConnectionInitiator.Connect(Uri uri, TimeSpan timeout)

I restarted the Data Access Service, it restarts fine. 

As per Event Log:

Also got this:

Please help

Thanks, Rajiv